Skip to main content
Categories

Suspension Systems

Suspension systems are responsible for keeping the tub balanced while the tub is in motion.

Indications of Failure:

  • Tub banging around during spin.
  • Off balance error codes.

Testing

  • Push down on each corner of the tub where a suspension rod is. If any particular rod has a bit more bounce, then all the suspension rods should be replaced.
  • Push down the whole tub, allow it to spring back. It should come right back to place. No additional bouncing.

Another Thing to Watch Out For

When the customer is experiencing an “Out of Balance” issue, another common issue is if the tub locking nut is failing. You can check for this being an issue by seeing if the inner tub has any “play” with regard to the outer tub. Grab the inner tub, try to shift it left and right. If you’re getting motion, you’ve likely got a bad hub. (Keep in mind, some unit have floating tubs, so this will not work.)

Table of Contents
Limited Time • Year-End 2026

Train Like a Pro.
Earn Gear & Get $100 Back!

Enroll in the Certified Professional Program and get rewarded for successfully completing your training!

KAIWEETS HT206D Digital Clamp Meter
✓ FREE KAIWEETS HT206D Clamp Meter! Guaranteed when you successfully complete the program with passing scores of 80% or higher. No three-month completion deadline for this reward.
$ Get $100 Back! Successfully complete the program with passing scores of 80% or higher within 3 calendar months of enrollment.
Unlock My Year-End Bonuses →

Offer Ends December 31, 2026

Available exclusively with eligible $475 paid-in-full enrollments made October 12 – December 31, 2026. Not included with the $59/month plan. Limit one of each reward per qualifying student. Completion requirements and other conditions apply. Full Promotional Terms & Conditions apply.